TM 9-4120-403-14
(8)
Note position of (C1) and (C2) capacitors.
(9)
Remove capacitor (C1).
Installation
(1)
Position capacitors (C1) and (C2) on bracket as noted during removal.
(2)
Aline retaining strap on bracket.
(3)
Secure retaining strap to bracket with two screws and locknuts.
(4)
See tags and wiring diagram (Fig. 4-43) and connect leads. Remove tags.
(5)
Aline bracket on inside casing.
(6)
Secure bracket to casing with four screws.
(7)
Install boots on capacitors.
(8)
Install L1 coil assembly, data plate and nut on L1 valve plunger.
Follow-on procedure:
4-127