TM 9-4120-405-13&P
4-29. CLAMPS, CABLE (Figure 4-20).
This Task Covers:
Replace
Initial Setup:
Tools Required
Tool kit, general mechanics
Equipment Condition
Generator set off.
REMOVAL.
1. Remove three nuts (1), three flat washers (2), and three screws (3).
2. Remove ground wire (4) and power cable (5) from clamps (6).
INSTALLATION.
1. Place power cable (5) and ground wire (4) in clamps (6).
2. Position clamps (6) on trailer and install three screws (3), three flat washers, and three nuts (1).
4-47
