TM 9-4120-405-13&P
This Task Covers:
Replace
Initial Setup:
Tools Required
Tool kit, general mechanics
Riveter, blind hand
REMOVAL.
1. Remove four rivets (1) and data plate (2).
2. Remove four rivets (1) and data plate (3).
3. Remove four rivets (1) and data plate (4).
4. Remove two rivets (5) and data plate (6).
INSTALLATION.
1. Position data plate (6) and install two rivets (5).
2. Position data plate (4) and install four rivets (1).
3. Position data plate (3) and Install four rivets (1).
4. Position data plate (2) and install four rivets (1).
4-43