TM 9-4120-407-14
Table 3-2. Unit Preventive Maintenance Checks and Services for Model F36T-MPI - Cont
Location
Not Fully Mission Capable
Procedures
Item To
Interval
Item
if:
Check/Service
No
If logic box assembly has
Logic box Assembly Check logic box assembly (1) for
Annually
11
been overheated.
any visible signs of
overheating such as burnt or
discolored case.
If logic box assembly is
Check logic box assembly (1)
damaged.
case for any visible damage
such as dents or tears.
Disconnect two connectors (2) and
check for any damage such
as broken or damaged pins.
Connect two connectors (2)
If logic box assembly (1) is
damaged in any way or is
suspected to be defective,
notify Direct Support
Maintenance.
Remove two screws (l), lock
Motor Controller
Annually
12
washers (2), and flat
Assembly
washers (3). Discard lock
washers.
3-31
