TM 9-4120-407-14
Figure 3-50. Terminal Boards (TB1) and (TB2)
b. Installation. The following procedures apply to both terminal boards and should be performed on each
one separately.
(1) Install marker strip (11), terminal board (7), two screws (8), new lock washers (9), and flat
washers (10).
(2) Connect capacitors (6) leads and wire leads to terminal board (7) terminals per tags and wiring
(3) Install two screws (1), new lock washers (2), flat washers (3), cover (4), and two posts (5).
NOTE
FOLLOW-ON MAINTENANCE:
Assemble and install the electrical components bracket. See para 3-28.
3-119