TM 9-4120-408-14
5-17. EVAPORATOR SIDE PANEL MAINTENANCE. (Continued)
Figure 5-12. Evaporator Side Panel Maintenance.
(4) Replace damaged bail handle 14) as follows:
(a) Remove and discard insulation material from evaporator side panel (2) as required.
(b) Remove and discard five rivets (5).
(c) Position bail handle (4) on evaporator side panel (2) and secure with five new rivets (5).
(5) If insulation material is damaged, refer to Appendix F. Figure F-12, manufacture new insulation material
and secure to side panel (2) with adhesive.
c. Install.
(1) Position evaporator side panel (2) on evaporator assembly (6) and secure with 60 screws (l).
(2) Follow on maintenance:
5-38