TM 9-4120-408-14
Figure P-12. Rubber Sheet.
PROCEDURE:
NOTE
Cut size of rubber sheet to ensure butting against adjoining metal or rubber surfaces.
All clearance holes and cutouts shall be held to a minimum size that will permit assembly of parts.
Insulation may be slit to facilitate installation.
Skin shall be permitted only on surfaces of insulation which are not bonded to metal.
Use location of rivnuts on evaporator coil as template for cutting holes in insulation to be mounted on
evaporator coil.
Using inner surface of evaporator housing, or mounting surface of evaporator coil, cut rubber sheet (Figure F-12)
to required size.
Table F-19. Rubber Sheets.
Find
Part or Identifying
Quantity
Description
NSN
Number
Number
Required
1
MIL-R-6130, Type
AR
Cellular Rubber
9320-01-340-7786
II, GR A, COND
MED (.250 STK)
2
MIL-R-6130, Type
2.00" W
Cellular, Rubber
II, GR A, COND
X
Sheet
MED (1.00 STK)
17.00' L
F-22