4.2 RAISING AND LOWERING COVER.
THIS TASK COVERS:
Rotating parts and lethal voltage levels are used in operating the FDECU. Be sure
power source is disconnected. Injury or death can occur if connected to power
(1) Shutdown the FDECU per paragraph 2.4 and disconnect it from power sou rce.
The FDECU cover is heavy. Be sure the cover retaining rod is in place and
properly secured with hair pin cotter. Injury can occur if cover drops.
(2) Release two latch hinges (1) and raise cover (2). Insert cover retaining rod (3) into latch hinge doubler (4)
and secure using hair pin cotter (5). Be sure to install hair pin cotter from top as shown so it cannot be
accidentally pulled out if lanyard cable gets snagged.
Figure 4-2. Cover.