TM 9-4120-411-14
4.15 OUTSIDE FAN REPLACEMENT.
(1) Install outside fan (2). Align one setscrew (1) over flat on outside fan motor shaft (3) then tighten two
setscrews.
4.16 ELECTRICAL SYSTEM GENERAL REPAIR.
THIS TASK COVERS
a. Repair
Initial Setup:
Tools
Materials/Parts
General Mechanics Tool Kit
Marker Tags (As Required)
Heat Gun
Crimp Nuts (As Required)
Splices (As Required)
Tiedown Straps (As Required)
Tiedown Straps (As Required)
Insulation Sleeving (As Required)
Wire ,Cable, or Harness (As Required)
Rosin Base Liquid Solder Flux (As Required)
a. Repair. Preferred repair methods consist of replacing wire leads, cables, harnesses, terminals, connectors, etc.,
rather than splicing wires, bending ends to form terminals, and other make shift procedures. Make shift repair
procedures may be appropriate for emergency field repairs but should be properly repaired as soon as possible.
4-34