TM 9-4120-411-14
4.24 FRONT SCREEN REPLACEMENT - CONTINUED.
Figure 4-23. Front Screen.
4.25 SUPPLY PANEL REPLACEMENT.
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Mechanics Tool Kit
Item 1, Section III, Appendix B
(1) Shutdown the FDECU per paragraph 2.4.
(2) If duct is attached, remove per paragraph 4.57. Push heater barrel (1) into volute assembly (2).
(3) Turn to release six captive hardware fasteners (3) and remove supply panel (4).
b. Installation. See figure 4-24.
(1) Install supply panel (4) and engage six captive hardware fasteners (3) to secure.
(2) Pull heater barrel (1) out of volute assembly (2) to stops (approximately 4 inches). Install duct if necessary
per paragraph 4.4.6.
(3) Connect FDECU to power source an d operate per paragraph 2.4.
4-60
