TM 9-4910-387-14-1
c. In preparation for use, reinstall fuel, lube oil, and waste tanks
by performing the following steps:
(1) Fuel Tank Assembly.
(a) Place cover assembly (1) on tank (2) and install
eleven washers (3), eleven screws (4), and twelve wingnuts (5).
(b) Place fuel tank assembly in position in lower frame
assembly.
(c) Install four clamps (6), four washers (7), and four
screws (8) and connect all hoses (9).
(d) Insert male connector plug (10) and turn clockwise.
(e) Remove cap (11) and refill with fuel (item 13, app C)
and replace cap.
2-23
