TM 9-4910-387-14-1
3. 24-V CURRENT OUTPUT IS NOT AVAILABLE AT 24 VOLTS DC OUTLET ASSEMBLY (1).
Check to see if 24-VDC switch (2) is turned OFF.
a. Turn 24-VDC switch to ON position.
b. If the above procedure does not correct fault, notify general support
maintenance.
4. COUNTER CIRCUIT DOES NOT FUNCTION WHEN START COUNT BUTTON (1) IS PRESSED.
Check to see if 500-1000-OFF count switch (2) is in OFF position.
a. Turn to 500 or 1000.
b. If the above procedure does not correct fault, notify general support
maintenance.
3-13
