TM 9-4910-387-14-1
11. BURETTES (1) WILL NOT FILL UP.
Step 1. Check to see if 500-1000-OFF count switch (2) is in OFF position.
Turn to 500 or 1000.
Step 2. Check to see if dumping lever (3) is pushed in.
a. Pull out dumping lever.
b. If the above procedures do not correct fault, notify general support
maintenance.
12. BURETTES (1) WILL NOT EMPTY.
Check to see if dumping lever (2) is pulled out.
a. Push dumping lever in.
b. If the above procedure does not correct fault, notify general support
maintenance.
3-19