TM 9-4910-387-14-1
RH CONTROL EQUIPMENT ASSEMBLY
1. FUEL HEAT LIGHT (1) DOES NOT LIGHT.
Remove RH panel assembly. Turn lens cap (2) counterclockwise and
remove clear lens (3), lens cap (2), and legend plate (4). Pull out
indicator light (5) through rear of RH control panel (6). Check lamp (7)
to see if burned out by installing in a known operational indicator
receptacle.
a. Replace lamp (TM 9-4910-387-24P) as required.
b. If the above procedure does not correct fault, notify next higher
level of maintenance.
4-17
