TM 9-4910-387-14-1
4-10. TROUBLESHOOTING INFORMATION (cont)
Table 4-3. TROUBLESHOOTING (cont)
MALFUNCTION
TEST OR INSPECTION
LOCATION
CORRECTIVE ACTION
LH CONTROL EQUIPMENT ASSEMBLY
4. POWER ON LIGHT (1) DOES NOT LIGHT .
Remove LH panel assembly. Turn lens cap (2) counterclockwise and
remove amber lens (3), lens cap (2), and legend plate (4). Pull out
indicator light (5) through rear of LH control panel (6). Check lamp (7) to
see if burned out by installing in a known operational indicator recepticle.
a. Replace lamp (TM 9-4910-387-24P) as required.
b. If the above procedure does not correct fault, notify
next higher level of maintenance.
4-20
