TM 9-4910-387-14-1
4-10. TROUBLESHOOTING INFORMATION (cont)
Table 4-3. TROUBLESHOOTING (cont)
MALFUNCTION
TEST OR INSPECTION
LOCATION
CORRECTIVE ACTION
TRAY AND DISCHARGE BLOCKS ASSEMBLY
6. FUEL PRESSURE GAGE DOES NOT INDICATE/FUEL IS NOT BEING
DELIVERED FROM FUEL PRESSURE INLET (1).
NOTE
For testers with only a single secondary fuel filter, there is
no plug to remove. Drain fuel after removing secondary
fuel body assembly.
Remove LH panel assembly. Remove three plugs (2) and drain fuel into
an available minimum-size 1-gal. (3.785-I) container. Loosen bolt
assembly (3) and two capscrews (4). Remove primary fuel body
assembly (5) and secondary fuel body assemblies (6). Check for dirty or
clogged filter elements (7 and 8).
a.
Clean or replace primary fuel filter element (TM 9-4910-387-
24P) as required.
b.
Replace secondary fuel filter elements (TM 9-4910-387-24P)
as required.
c.
If the above procedure does not correct fault, notify next
higher level of maintenance.
4-22
