TM 9-4910-387-14-1
REASSEMBLY
INSTALLATION
1 MOUNTING BAR (1). Position on
CAUTION
accumulator can assemblies (2).
2 TWELVE SCREWS (3). Install using cross
Be careful when using slip joint
tip screwdriver (4).
pliers so no damage to hoses
occurs. Apply only enough
pressure to prevent hoses from
slipping.
1 SIX HOSES (1) WITH SIX MALE HOSE
FITTINGS (2). Install on accumulator
assembly (3) using 7/16-in. open end
wrench (4) and slip joint pliers (5).
2 ACCUMULATOR ASSEMBLY (3).
a.
Position against plate (6).
b.
Install two screws (7), two washers (8),
and two nuts (9) using two 7/16-in.
open end wrenches (10).
4-61
