TM 9-4910-387-14-1
INSTALLATION
2 PIVOT BLOCK (4).
a.
Position on plate (5) and strap (6).
b.
Install two washers (7) and two screws
(8).
1 SIX HOSES (1) WITH SIX MALE HOSE FITTINGS
(2). Put through plate (3).
3 SIX HOSES (1) WITH SIX MALE HOSE
CAUTION
FITTINGS (2). Install on accumulator
assembly (9) using 7/16-in. open end
Be careful when using slip joint
wrench (10) and slip joint pliers (11).
pliers so no damage to hoses
occurs. Apply only enough pressure
to prevent hoses from slipping
4-57
