STARTER MICROSWITCH MAY BE DEFECTIVE

TM 9-4910-387-14-2

2 Remove both leads. Connect one multimeter lead to thermal heater

contact (4) and connect other lead to thermal heater contact (5).

3 Remove both leads. Connect one multimeter lead to thermal heater

contact (6) and connect other lead to thermal heater contact (7).

4 Check for continuity. If no continuity exists, replace the starter (p 6-

219).

5 If main drive motor fails to start, proceed to step G.

G. STARTER MICROSWITCH MAY BE DEFECTIVE

1 Connect one multimeter lead to starter contact C2 (1) and the other

lead to starter contact C3 (2).

2 Push up on forward contact arm (3).

6-17

Privacy Statement
Press Release
Contact