TM 9-4910-387-14-2
6-5. RH CONTROL EQUIPMENT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY OF RH MOUNTING BOARD ASSEMBLY
1 TWO NUMBER STRIPS (1), TWO TERMINAL STRIPS (2), EIGHT
LOCKWASHERS (3), AND EIGHT SCREWS (4). Install on RH
mounting board (5).
2 HOLDING RELAY (6). Position on RH
mounting board (5).
3 LOCKWASHER (7) AND SCREW (8). Install through rear of RH
mounting board (5) into holding relay.
SCREWS (10). Install on RH mounting board (5).
5 STEPPING RELAY (11). Position on RH
mounting board (5).
through rear of RH mounting board (5) into stepping relay.
6-200