WHY? . . . To see if starter amperage draw is normal with engine at
operating temperature, but NOT running
CAUTION
Remove battery neg (-)
terminal first. Connect
C7 cable to ground cable
next. Then connect leads
to LVCT. Connect C7 lead
to battery neg (-) terminal
last
POSTS USED
22 - EXT Shunt
23 - EXT Shunt
SWITCHES & KNOBS
Start Position
2 - OFF
3 - 50 volts
7 - Full Left (ccw)
10 - Full Left (ccw)
19 - Open
20 - Full Left (ccw)
21 - Open
31
