WHY? . . . If during starter voltage test, the voltmeter registers
less than 18 volts and batteries checked above 18 volts,
these tests will find the high resistance cable or con-
nection. Any high resistance connection must be re-
moved. Have the mating surfaces cleaned, reassembled,
and tightened. If it's a cable, replace it
POSTS USED
5 - Voltmeter +
6 - Voltmeter -
SWITCHES & KNOBS
Start Position
2 - OFF
3 - 20 volts
7 - Full Left (ccw)
10 - Full Left (ccw)
19 - Open
CAUTION: DO not crank engine over 30 seconds. If you
20 - Full Left (ccw)
do, let starter motor cool before cranking
21 - Closed
again
Switch
to 20 volts after each test is
completed
35
