TM 9-4935-481-14-1
Table 2-1. DMS-D Daily Services-Continued
Steps (perform in sequence
Item to
Before
During
After
be
Procedure
Reference or Action
Operation
Operation
Operation
Inspected
12
24
Radiometer
Inspect for accumulation
Refer to radiometer
Electronics
of dirt, oil, grease, or
manual for cleaning and
Package
other foreign material.
corrective action
Inspect for damage to case,
procedures.
cracked or broken glass
on meter. Check switches
and control for ease of
operation. Inspect con-
nectors for damage.
13
25
Radiometer
Inspect for accumulation
Refer to radiometer
Optical
of dirt, oil, grease, or
manual for cleaning
Head
other foreign material
and corrective action
(Colli-
Inspect for damage to
procedures.
mator)
housing, cracked or broken
lens, or damaged connector.
14
26
Radiometer
Inspect for accumulation of
Refer to radiometer
Detector
dirt, oil, grease, or other
manual for cleaning and
foreign material. Inspect
corrective action
for damage to housing.
procedures.
Check detector for cracked
or broken element. Inspect
connector for damage.
15
27
Radiometer
Inspect for accumulation of
Refer to radiometer
Cable
dirt, oil, grease, or other
manual for cleaning and
foreign material. Inspect
corrective action
for cracked insulation or
procedures.
damaged connectors.
Table 2-1. DMS-D Daily Services-Continued
Steps (perform in sequence
Item to
Before
During
After
be
Procedure
Reference or Action
Operation
Operation
Operation
Inspected
16
28
DMS-D
Perform operator's self-test
Test Set
using table 3-8.
At conclusion of operation,
uncable all equipment and
store all cables and equip-
ment. Refer to fig. 1-1
and TM-02819D-15 or
TM-O6895A-15.
2-5/(2-6 Blank)
