TM 9-4935-481-14-1
Table 2-2. DMS-G Daily Services-Continued
Steps (perform in sequence
Item to
Before
During
After
be
Procedure
Reference or Action
Operation
Operation
Operation
Inspected
9
15
Cable
Inspect for accumulation of
Clean as required.
Assemblies
dirt, oil, grease, or other
Repair as necessary.
foreign material. Inspect
for damage to insulation,
connectors and bent or
missing pins.
10
16
Circuit
Inspect for accumulation of
Clean as required.
Card Test
dirt, oil, grease, or other
Repair as necessary.
Adapters
foreign material. Inspect
for visible damage to hous-
ing. Check for damage to
connectors, bent or missing
pins. On those adapters with
cables or wires attached
check for damaged insulation,
damaged, or missing connec-
tors or clips.
11
17
DMS-G Test
Perform operator's self-test
Kit
using TM 9-4935-481-40. At
conclusion of operation, un-
cable all equipment and store
cables and equipment. Refer
2-8