TM 9-2330-297-14&P
FRONT HARNESS
This task covers:
a. Removal (page 436)
b. Installation (page 39)
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, flat-tip
String
Tool kit, electrical connector
Tape, electrical
Wrench, box, 3/8inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Chassis front
Resistor box (1)
a. Using screwdriver, remove two
crossmember
screws (2).
b. Pull resistor box (1) out of chassis
front crossmember.
2.
Resistor
Receptacle
box (1)
harness (3)
wires (4) from resistor box (1).
b. Tie a 4-foot (1.25meter) guide string
on end of receptacle harness (3), and
tie loose end to chassis.
4-36