TM 9-2330-297-14&P
FRONT HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
3. Chassis front
Receptacle (5)
a
Using screwdriver, remove two
crossmember
screws (6)
b. Pull receptacle (5) out of chassis front
crossmember
c. Using screwdriver, loosen screws (7)
and unhook wires (8).
d. Using screwdriver and 3/8-inch wrench,
remove screw (9), nut (10), and ground
wire (11)
4.
Receptacle
a Pull out of chassis through hole (12).
harness (3)
b. Untie and remove guide string from re-
ceptacle harness (3)
Leave guide string attached to chassis.
TA223130
4-37