TM 9-2330-29714&P
REAR HARNESS
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, flat-tip
String
Tape, electrical
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Rear chassis
Rear harness (1)
a. Pull connector (2) from main harness
crossmember
receptacle (3).
b. Pull connectors (4) from taillight
receptacle (5).
c. Pull marker light connectors (6) from
d. Pull license plate light connector (8)
from rear harness receptacle (9).
e. Tie guide string to each connector.
f. Using screwdriver, remove grommets
(10), (11), (12), and (13).
g. Pull rear harness (1) out of rear
chassis crossmember through hole (14).
h. Untie guide strings.
INSTALLATION
2.
Rear harness (1)
a. Tie guide strings to harness (1).
b. Draw new harness (1) through hole (14)
and out of holes (15), (16), (17),
and (18)
c. Push connector (2) into receptacle (3).
d. Push two connectors (4) into taillight
receptacle (5).
e. Push marker light connectors (6) into
f. Push license plate light connector (8)
into rear receptacle (9).
4-42