TM 9-4120-370-14
T0 35E9-229-1
CABLE CONNECTIONS THROUGH RETURN (CONDITIONED AIR INTAKE) DUCT - Continued
4-8.
If control panel is to be mounted in a remote location and remote control cable connector is to be connected
g.
through return air duct:
NOTE
Fabrication of interconnecting remote control cable described in paragraph 47.t will ap-
ply except that it will be connected to the J20 connector on the unit in place of the J8
connector on block off.
(2) Remove plastic dust caps from connectors J19 and J20. Store caps in a safe place for possible future use.
(3) Connect P8 connector and harness to J19 connector and harness.
h.
Reinstall lower front panel.