TM 9-2330-211-14&P
4-16. WIRING HARNESS REPAIR (Con't)
ACTION
LOCATION
ITEM
REMARKS
6.
Replacement
Connector (10)
a. Slide one end of connector (10) onto end of
wire (8)
replacement wire (8).
b. Slide other end of connector (10) onto wire lead
(7) to receptacle.
c. Crimp connector (10) at both ends using crimp-
ing tool.
d. Repeat a through c for other end of replacement
wire (8) to Iight assembly wire lead (9).
7.
Wiring harness (1)
Five clips (3)
Put onto wiring harness (1) and replacement wire (8).
and replacement
wire (8).
Five clips (3)
Five screws (2),
8.
Screw on and tighten using
in. wrench and
Iockwashers (5),
flat-tip screwdriver.
and nuts (4)
FOLLOW-ON MAINTENANCE:
Check operation of lights.
TASK ENDS HERE
4-43