TM 9-2330-381-14
4-68. DEFLECTORS (CONT)
4.
Position deflector (4) on platform weldment brackets and secure with four capscrews (7), washers (6), and locknuts
(5).
5.
Position access cover (3) on deflector (4) and install four lockwashers (2) and capscrews (1).
6.
Reconnect electrical leads to clearance lights mounted on access cover and deflector.
4-69. STOWAGE COMPARTMENT
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Jack, hydraulic floor, 10 ton, item 18, appx. B
Materials/Parts
Lockwasher (4)
Self-locking nut
Personnel Required: 2
Equipment Condition
BII inventoried and removed from stowage box (table 2-1)
REMOVAL
1.
Loosen four nuts (1) and screws (2) securing platform stowage compartment (3) to platform (4).
2.
Position hydraulic floor jack (5) under stowage compartment (3) and raise jack until jack makes firm contact with
bottom of stowage compartment.
3.
Remove four nuts (1), lockwashers (6), and screws (2) securing stowage compartment to platform (4). Discard
lockwashers.
4.
Using two people, steady stowage compartment (3) on pedestal of hydraulic floor jack (5), lower jack as necessary,
and pull jack with stowage compartment from under platform (4).
4-326 Change 3