TM 9-2330-381-14
4-70. DAVIT ASSEMBLY (CONT)
DISASSEMBLY
1.
Remove two nuts (7), bolts (8), and clamp (9) from cable (10). Separate clamp (9) and remove hook (1).
2.
Remove linch pin (11) from hitch pin (12) and remove hitch pin from pulley clamp (3) and davit arm (6).
3.
Remove pulley clamp (3) from end of davit arm (6).
4.
Remove nut (13), lockwasher (14), bolt (15), washer (16), and pulley (17) from pulley clamp (3).
Discard
lockwasher.
5.
Remove three screws (18), lockwashers (19), washers (20), and winch assembly (21) from davit assembly (6).
Discard lockwashers.
4-330
