TM 11-5895-463-15
a. Close and secure the covers on the signal
entrance box and the power entrance box.
b. Close and secure the blower vent cover on
the front of the shelter and the filter cover on
the entrance door.
c. Check the area to make sure that all com-
ponents and parts have been recovered and
stored (fig. 5-1).
d. Check the interior of the AN/MSC-31A
to make sure that all components and parts
have been properly secured and that all com-
partment doors are closed and secured (fig. 5-
1).
e. If the AN/MSC-31A is truck-mounted,
close and secure the tailgate and check to see
that the sling assembly is secure.
Storage
Repackaging of the AN/MSC-31A for shipment
or limited storage will normally be performed at
a packaging facility or by a packaging team. If
emergency packaging is required, select materials
from those listed in SB 38-100. Package the
AN/MSC-31A in accordance with the original
packaging as far as possible with available
materials (fig. 2-1).
Note.
For repackaging of the major components,
refer to the instructions given in the applicable tech-
nical manuals.
CAUTION
When transporting the AN/MSC-31A
by air, the outside vent covers of the
shelter must be opened to equalize
the atmospheric pressure in the shel-
ter.
Section II. DELETED.
Change 3
