TM 11-5895-463-15
SHIPMENT AND LIMITED STORAGE
5-1. Preliminary Procedures
g. Disconnect the ground strap from the
a. Turn off all operating equipment accord-
ground rod and store it in a storage cabinet.
ing to the stopping procedures given in para-
h. Remove the ground rod, clean and store
b. Turn all switches and circuit breakers to
i. Wind the power cable and the telephone
OFF.
cable on their respective reals, and secure the
c. Check to see that all equipments are
j. Disconnect the air conditioner power
d. For prolonged storage at long distance
cable and store it in a storage cabinet (fig.
shipment, remove the batteries from the TA-
1-10).
312/PT and from the hand latern.
e. Remove the mounting straps and fixtures
wire, and store them in the storage bag inside
from the storage cabinets for use in securing
the equipment.
l. Disconnect the radio cables and store
f. Secure all items on the common items
them in the storage bag.
panel with the clamps provided and mount the
wastepaper baskets in their brackets.
g. Place all miscellaneous items in the stor-
age cabinets.
5-2. Disassembly of
Equipment
a. Disconnect all field wires from the signal
b. Disconnect the 26-pair cable at the signal
entrance box and replace the covers on the re-
c. When 115 volts ac power cable from the
OUT POWER 115V AC receptacle at the adja-
cent shelter. Replace the receptacle and con-
nector cover.
d. When 115 volts ac power is obtained from
a commercial source, proceed as follows:
(1) Turn off or disconnect the power.
(2) Disconnect the power cable connector
from the power cable stub connector. Replace
both connector covers.
(3) Disconnect the power cable stub from
the commercial source and store it in a storage
cabinet.
e. Disconnect the power cable from the IN
POWER 115V AC receptacle in the power
entrance box, and replace the covers on the
receptacle and connector.
f. Disconnect the ground strap from the
GROUND TERMINAL in the power entrance
box .
Change 3