TM 3-1040-262-13&P
Table 3-1. Operator's Preventive Maintenance Checks and Services. - Continued
B - Before Operation
A - After Operation
Interval
Procedures
For readiness reporting
Item
Check and have repaired or
equipment is not ready/
No.
B
A
Item to be inspected
adjusted as necessary
available if
GUN ASSEMBLY
Make sure that trigger is operable.
(Cont.)
Squeeze and release trigger two or
three times. If the trigger re-
turns freely after each squeeze,
the gun is operating properly.
Make sure that adjust nut is
screwed tight against handle
body.
3
AIR PRESSURE
Check that air cylinder is charged
ASSEMBLY
and tagged with content and date.
4
AGENT CONTAINER
Check that agent container is tag-
ASSEMBLY
red as filled.
5
AFTER OPERATION
Before turning in the disperser to
SERVICES
organizational maintenance per-
sonnel, in an area designated as
safe by the local commander,
Slowly open the drain cock (16).
After pressure has been released,
squeeze the trigger while aiming
the gun away from friendly per-
3-4