TM 3-1040-262-13&P
Figure 2-1. On Site Separation of Empty Agent Container Assembly from Frame and Harness Assembly
e. Move the empty agent container (with the
b. Open the spring loaded clamps (2 places) that
hold the agent container on the frame and harness
manifold coupler assembly, hoses, and gun still
assembly.
attached) as a unit away from the frame and harness
c. Remove the agent container assembly from
assembly to prevent contamination of these parts.
f. Invert the agent container so that the filling
the frame and harness assembly. The manifold coupler
neck is upward and slowly open the drain cock.
assembly hoses, and gun are still attached to the agent
g. After pressure has been released, squeeze the
container.
d. The cam action closure and the support collar
trigger while aiming gun away from friendly personnel.
are on the full agent container assembly. However, in
container.
Change 1 2-3
