c. Follow-On Maintenance.
Stow manual override lever (3).
END OF TASK
This Task Covers:
Tools and Special Tools
TM or Para
Vehicle prepared for servicing (Do
not install FEL maintenance arm).
MOS 21J, Construction Engineering Operator
Estimated Time to Complete
This procedure is for emergency towing of
the vehicle only, and will manually release
the vehicle's brakes. Ensure that vehicle is
secured by the towing vehicle or wheel
chocks before attempting the following
procedure. Failure to comply may allow the
vehicle to move, resulting in serious injury
or death to personnel and/or equipment
Remove nut (1), washer (2), and release
bolt (3) from stowed position on side of
brake chamber housing (4).
Remove plug and ensure bottom seat (5) is
clear of dirt and debris.