TM 5-2420-230-10
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
References
Test Equipment
None
None
Equipment Conditions
Tools and Special Tools
TM or Para
Condition Description
Vehicle prepared for servicing (Do
not install FEL maintenance arm).
Drawings Required
Materials/Parts
None
None
Estimated Time to Complete
Personnel Required
6 min.
MOS 21J, Construction Engineer Operator
a. Removal.
(1)
Using ratchet/breaker bar and socket, remove
six bolts (1) and washers (2) from engine
access panel (3).
(2)
Remove engine access panel (3) from vehicle.
b. Installation.
(1)
Position engine access panel (3) on vehicle,
ensuring that mounting holes are aligned.
(2)
Using ratchet/breaker bar and socket, install six
washers (2) and bolts (1). Tighten bolts.
c. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch.
END OF TASK
Change 1