TM 5-2420-230-10
(9)
Remove spare tire (1) and carrier (2) from backhoe bucket (3) (Para 8-6).
(10) Attach spare tire (1) and carrier (2) to FEL 4-in-1 bucket. Secure to 4-in-1 bucket with chain.
(11) Roll the Front-End Loader (FEL) bucket to the full back position (Para 6-4).
(12) Adjust boom height until it is approximately 102 in. (2 590 mm) from ground.
(13) Ensure backhoe lifting lug is approximately 0.8 in. (20 mm) from ground.
(14) Stow backhoe stabilizers and install turnbuckles (Para 7-7).
(15) Stow side mirrors (4) by holding mirror frame (5) and pushing mirror toward cab (6).
(16) Move warning beacon (7) to rear of cab (6).
(17) Remove radio antenna and base.
(18) Place MODE CONTROL switch in C130/LIMP mode (Para 5-3). Wait for all air to be exhausted from air bags.
(19) Turn air bag valve (8) off at each air bag.
(20) Shut OFF engine (Para 5-2).
(21) Using adjustable wrench, ratchet and 10 mm socket, remove nut (9), washer (10), bolt (11), and ride level valve
linkage (12) from axle bracket (13).
E-2
