TM 5-2420-230-10
Use care when removing or installing snap and retaining rings. Snap and retaining rings are under
spring tension and can act as projectiles when released and could cause severe eye injury.
(8)
Remove circlip or securing pin from attachment pin.
(9)
Remove attachment pin from attachment.
(10) Operate boom and lower attachment to ground (Para 7-5).
(11) Operate backhoe arm to disengaging its coupler lugs from coupler pin (Para 7-5).
(14) Install attachment pin.
(15) Install circlip or securing pin on attachment pin.
d. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch.
a. General.
The IHMEE carries a spare wheel and tire attached to a carrier which, during driving operations, is mounted on the
backhoe bucket. The spare wheel and carrier must be removed from the IHMEE when undertaking backhoe operations.
b. Removal.
(1)
Position vehicle on level ground.
(2)
Ensure PARK BRAKE lever is ON
(3)
(4)
(5)
Remove turnbuckles from stabilizer arms
(6)
(7)
(8)
Remove travel stop from bucket cylinder
(9)
Remove retaining clip securing holding pin.