TM 55-1930-208-10
3-4. ULLAGE ASSEMBLY MAINTENANCE - Continued.
a. Removal.
(1) Loosen handle (1) and move away from ullage assembly (4).
(2) Remove two cotter pins (2), pin (3), ullage assembly (4), and gasket (5).
(3) Remove screen (6).
b. Inspection.
(1) Inspect for corrosion.
(2) Inspect for damage or broken welds. Replace a damaged ullage.
(3) Inspect gasket for damage. Replace a damaged gasket.
(4) Inspect screen for dirt or debris. Clean or replace damaged screen.
c. Service. Lubricate in accordance with paragraph 3-1.
d. Installation.
(1) Install screen (6).
(2) Install gasket (5) on ullage assembly (4).
(3) Position ullage assembly (4) on pin lugs and secure with pin (3), and two cotter pins (2).
(4) Swing handle (1) over ullage assembly and tighten.
3-10
