TM 55-1930-208-10
Table 2-4. Operator/Crew Preventive Maintenance Checks and Services (PMCS- Continued
INTERVAL
PROCEDURES
EQUIPMNET IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO
B
D
A
INSPECTED
OR ADJUST AS NECESSARY
AVAILABLE IF:
6
Inspect for damage or deter-
ioration. Replace defective
muffler. Inspect flange
connection. Inspect support
brackets. Wire brush and
paint rust areas.
7
FAN EXHAUST
Inspect for missing, frayed
or broken drive belts. Re-
place damaged belts. With
drive belts removed, rotate
blower shaft and check for
noisy bearings. Notify di-
rect support maintenance if
noisy bearings are found.
Inspect for obstructions.
Clean as necessary.
8
FUEL TANK,
Inspect for leaks. Inspect
Class III fuel
ENGINE
for damage or deteriora-
leak is present.
tion. Inspect fuel lines
for leaks. Notify direct
support maintenance if tank
leaks or damaged fuel lines
are found. Service fuel
tank by adding fuel oil
(item 9, Appendix D).
9
BOOM, CARGO
Inspect for rust or corro-
sion. Wire brush and paint
rust areas. Lubricate in
accordance with paragraph
and lines for breaks or ex-
cessive wear. Notify direct
support maintenance if
blocks or lines are damaged.
10
DAVIT, ANCHOR
Inspect for corrosion.
Clean and paint. Lubricate
in accordance with paragraph
fraying. Inspect shackle
for damage. Notify general
support maintenance if vans
lines or shackle is damaged.
2-8
