TM 9-1550-416-14&P
Position the wing half on the horizontal fuselage and line the
(6) Install wing halves. (See fig. 3-22.) Trial fit
trailing edge up with the reference line. Ensure that the throttle
each wing half onto the fuselage. Mark along the bottom of
pushrod is in the groove along the bottom edge of the wing
each wing half the amount it overlaps the horizontal fuselage.
root. Hold until dry. Repeat the procedure for the other half of
Using approximately one ounce of epoxy, coat the bottom of
the wing.
the wing (up to the intersection line) and the wing root.
Figure 3-22. Wing installation.
3-19
