TM 9-1550-416-14&P
(c) Connect the aileron servo connector to
NOTE
the receiver aileron channel plug.
In all connections IO the receiver, the black (or nega-
(d) Connect the throttle servo connector to
tive) lead is always to the outside of the receiver. The
the receiver throttle channel plug.
receiver antenna is already plugged into the receiver
and threaded through the strain relief hole.
in the vertical stabilizer as shown. These slots do not have to
be cut very deep into the vertical stabilizer; a 1/2 inch depth
(12) Connect the servo/battery group to the re-
slot is sufficient Insert the antenna into the slots cut in the
vertical stabilizer in the manner shown, allowing for a small
(a) Connect the battery connector to the re-
amount of slack.
ceiver power plug.
(b) Connect the elevator servo connector to
the receiver elevator channel plug.
Figure 3-28. Antenna routing.
3-24