TM 9-1550-416-14&P
(15) Install muffler. (See fig. 3-14.) Attach muffler
(14) Attach propeller. (See fig. 3-14.) Attach pro-
using two screws-and the muffler extension provided. Tighten
peller to engine assembly using a 4-way wrench. Tighten nut
screws "wrist tight" (approximately 20-25 in/lbs).
"wrist tight" (approximately 20-25 in/lbs). Rounded face of
propeller facts away from engine. This is normally the side
(16) Connect feed and pressure lines. (See fig. 3-
with the propeller trade name or size printed on it.
the pressure line to the muffler extension nipple.
Figure 3-29. Feed and pressure line connection.
3-25
