TM 9-1550-416-14&P
GROUND SUPPORT EQUIPMENT (GSE)
3-12.
KIT ASSEMBLY PROCEDURES.
Obtain the following items, listed in Table 3-3, from
a.
the GSE kit container: (For item identification, see figure D-3.)
Table 3-3. Materials Required for GSE Assembly
Item
Quantity
1
GSE Master Charger Set
1
GSE Master Charger
5
4
Receiver Charge Cables/Short
4
Receiver Charge Cables/Medium
4
Receiver Charge Cables/Long
1
GSE Field Box Set
1
GSE Field Box
1
12 Volt Starter Battery (Installed)
1
12 Volt Fuel Pump with Tubing (Installed)
1
Fuel Can with Cap Fillings (Installed)
1
Power Panel (Installed)
1
12 Volt Starter
3
Glow Plug Clip
1
Emergency Power Cables
1
1
1
Tool Set
1
4-Way Prop Wrench
1
Large Phillips Screwdriver
1
Small Phillips Screwdriver
1
Small Standard Screwdriver
1
Foam Saw
1
Needle Nose Pliers
1
4-40 Allen Wrench
1
6-32 Allen Wrench
4
Hemostat
3-27