TM 9-2320-211-10-1
Avoid long runs under other than normal weather, and on rough
(5)
terrain.
Avoid sudden forced movement of an operating control.
(6)
Avoid overheating the engine.
(7)
Avoid operating the engine or the power train at full speed.
(8)
c.
Road Test.
CAUTION
Do not go faster than the maximum allowable
speeds shown on the MAXIMUM ROAD SPEED
data plate. Refer to paragraph 4-6 d. Do
not drive continuously at the maximum allow
able speeds. Be alert for signs of equipment
failure.
All trucks received by the using organization must be road tested to check opera-
tion and condition. For all new or reconditioned trucks, except those driven 50
miles or more during deliver, the road test will be a minimum of 50 miles. For used
trucks and trucks driven 50 miles or more during delivery, the road test will be long _
enough to see vehicle operation and condition. The operator will look at the instru-
ment panel and gages, as often as possible, for signs of unsatisfactory performance.
Stops will be made at least every 10 miles to give the operator a chance to check
the truck for possible coolant, oil, fuel or exhaust leaks and any signs that may
show the engine, transmission, wheel hubs , brakedrums , axle differential or transfer
assemblies are overheated. The truck must be checked thoroughly for any control
hard to operate and any instrument not operating properly. Unusual noises and
vibrations will be noted. All unusual conditions will be told to the organizational
maintenance unit.
d. After the Road Test. After the road test, fix any faulty condition which
can be done at operator's maintenance level. Tell the organizational maintenance
unit about any other faulty conditions.
