TM 9-2320-211-10
Crane control valve bank assembly controls crane boom, hoist, crowd, and swing
4
operations.
Floodlights are used during night operations. Each light is equipped with a toggle
5
switch for independent operation. Master switch is on instrurnent panel.
Shipper brace retaining brackets are used to secure shipper braces when not in use.
6
Shipper braces support boom during heavy rear lift operations or during cross-country
7
travel.
Crane boom extends from 10 to 18 feet and elevates to approximately 45.
8
Rear winch cable tensioner applies tension on the rear winch cable by squeezing the
9
cable between a pair of sheaves mounted on front of winch.
Outrigger ,frame tubesprovide stowage for outriggers when not in use.
10
L-shaped outrigger retaining pins are used to secure outriggers in frama tubes when not
11
in use.
Outrigers support truck frame during heavy side lift operations to prevent twisting
12
strains
TA 155218
Change 1