TM 9-2320-211-10
13
Boom control lever raises boom
when pulled toward operator,
lowers boom when moved away
f r o m operator. See 4 on facing
page
14
Hoist control lever raises boom
hook when pulled toward operator,
l o w e r s hook when moved away
from operator.
15
Crowed control lever retracts boom
when pulled toward operator
extends boom when moved away
from operator.
16
Swing control lever swings crane assembly RIGHT when pulled toward operator,
swings crane assembly LEFT when moved away from operator.
17
Cable tensioner control valve controls pressure on rear winch cable by two sheaves.
Lever is pulled up to release pressure, down to apply tension to winch cable.
18
Crane drive control lever is moved away from rear winch to operate crane, after engine
clutch control lever is disengaged and power divider is engaged.
19
Rear winch shift lever controls
direction of rotation of rear winch
drum. Control is moved away from
rear winch to UNWIND, toward
rear winch to WIND. Center
position is NEUTRAL.
20
Throttle control lever controls
engine speed and, as a result, winch
speed.
21
Clutch control lever permits engine
clutch operation from rear of
vehicle Push lever clown to engage
engine clutch. Pull lever up to
disengage engine clutch.
Control lever lockpin (M543) locks
22
winch shift lever in NEUTRAL
the
position and the pump control lever
in D1SENGAGE position when
neither is in use.
23
lever
lockplate
(M62)
Control
secures the pump control lever in
DISENGAGE position and the rear
winch control lever in NEUTRAL
position when neither is in use.
TA 066993