TM 9-2320-211-10
3-14. Wheel and Tire Replacement.
a. Removing Wheel and Tire Assembly:
(1) Position truck on level ground and stop engine.
CAUTION
Always apply handbrake and block at least one truck wheel before removing
wheels. Whenever possible avoid removing wheels when truck is on sloping terrain.
(2) Place gearshift in N (neutral) position and set handbrake.
(3) Obtain jack and combination jack
handle (6) and wheel stud nut wrench (7)
0
from tool compartment.
(4) Loosen wheel nuts (8) with jack
handle (6) and wheel stud nut wrench (7)
but do not remove.
NOTE
Left side wheel nuts have
left-hand threads; right side
wheel nuts have right-hand
threads.
(5) Remove spare wheel and tire as follows:
(a) Remove nuts (9) securing spare wheel to spare wheel mounting, or:
(b) Remove retaining clamp nut (11) and swing retaining clamp (10) down.
(c) Remove spare wheel and tire assembly.
TA 067133
