TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-63. M984E1 CRANE OPERATION MANUAL CONTROLS) (CONT).
g. Stow Outriggers.
(1) Remove two retaining pins (1) from each outrigger pad (2).
NOTE
Operate left and right outrigger jack (LH O/R JACK and
RH O/R JACK) levers at the time until both
outrigger jack cylinders are out pads.
(2) Move left outrigger jack (LH O/R JACK) and right outrigger jack
(RH O/R JACK) control levers (3 and 4) to UP position to retract
outrigger jack cylinder (5) completely.
(3) Install two retaining pins (1) outrigger pads
(4) Stow outrigger pads (2) on studs (6).
(5) Install safety pins (7) through stud (6).